Vhbad-2 - Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message
from WWN Manager error: [hex] response: [hex].
VHBAD-3
Error Message
Error Message
from VSAN Manager, error: [hex].
Error Message
error: [hex].
OL-15956-01
VHBAD-2-PROC_WWNM_GET_WWN_FAIL: Failed to get local controller pwwn
SCSI target process used the wwnm_bwt_get_local_controller_wwn() API for the
Explanation
port WWN and it failed because of the error and response code shown in the error message. No SCSI
discovery can be performed.
Enter the show process cpu and show system internal sysmgr service all CLI
Recommended Action
commands or use a similar Fabric Manager/Device Manager procedure to collect more information.
See the WWN manager system error codes for the reason.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
VHBAD-2-PSS_INIT_FAIL: pss initialization failed due to error: [hex].
SCSI target process persistent storage service (PSS) initialization failed because of the
Explanation
error shown in the error message. No SCSI discovery can be performed.
Enter the show flash CLI command or use a similar Fabric Manager/Device
Recommended Action
Manager procedure to collect more information. See PSS system error codes for the reason.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
VHBAD-3-PROC_VSAN_GET_RATOV_FAIL: Failed to get VSAN attribute RATOV
SCSI target process used the VSAN_get_global_value() API for RATOV and it failed
Explanation
because of the error shown in the error message.
This is a non-fatal error. The default value for RATOV is used. Enter the show
Recommended Action
process cpu and show system internal sysmgr service all CLI commands or use a similar Fabric
Manager/Device Manager procedure to collect more information. See the VSAN Manager system
error codes for reason.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
VHBAD-3-PSS_CREATE_FAIL: pss create runtime database failed due to
SCSI target process persistent storage service (PSS) create runtime database failed
Explanation
because of the error shown in the error message. No SCSI discovery can be performed.
Enter the show flash CLI command or use a similar Fabric Manager/Device
Recommended Action
Manager procedure to collect more information. See PSS system error codes for the reason.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
Cisco MDS 9000 Family System Messages Reference
2-431