Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual page 139

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
FCS-4
Error Message FCS-4-BAD_CT_FRAME: Invalid FCS frame: [chars] received from [hex].
FCS-5
Error Message
FCS-6
Error Message
Error Message
VSAN [dec].
FCSP-MGR Messages
This section contains the Fibre Channel Security Protocol (FCSP-MGR) messages.
OL-15956-01
An invalid FCS FC-CT frame with [chars] received from FC-ID [hex].
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 3.2(1).
Introduced
FCS-5-API_FAIL: [chars]: [chars].
Explanation An API called by Fabric Configuration Server (FCS) failed. The error message
indicates the failed API name and the reason for failure.
If this message is seen during a cold boot, it means that the queried module
Recommended Action
came up after Fabric Configuration Server (FCS) and this case can be ignored.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
FCS-6-INFORMATION: [chars].
An event happened that affects FCS. The error message indicates the event.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
FCS-6-REXMIT_PKT: Retransmitting request [chars] to domain [dec] in
Explanation There was a retransmission of an FC2 request. The error message indicates Fabric
Configuration Server (FCS) request, the remote domain, and the VSAN ID.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
Cisco MDS 9000 Family System Messages Reference
2-103