Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual page 508

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message
(expected [chars], got [chars]).
Error Message ZONE-2-ZS_TCAM_BROADCAST_ZONE_DISABLED: Broadcast zoning disabled :
Reason: Hard zoning disabled.
Error Message
Hard zoning disabled.
Error Message
Reason: [chars].
Error Message
Reason: Hard zoning disabled.
Cisco MDS 9000 Family System Messages Reference
2-472
ZONE-2-ZS_PSS_VER_MISMATCH: PSS version mismatch URL: [chars]
Configuration version mismatch. persistent storage service (PSS) URL expected the
Explanation
shown version, but the stored version is different.
Recommended Action Upgrade or downgrade to the expected version.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Broadcast zoning disabled because hard zoning was disabled because of a ternary
Explanation
content-addressable memory (TCAM) programming failure.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 2.0(1b).
Introduced
ZONE-2-ZS_TCAM_LUN_ZONING_DISABLED: LUN zoning disabled :
Explanation LUN zoning disabled because hard zoning disabled because of a ternary
content-addressable memory (TCAM) programming failure.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
ZONE-2-ZS_TCAM_PROGRAMMING_FAILED: TCAM operation failed : [chars],
Ternary content-addressable memory (TCAM) programming failure has occurred.
Explanation
No action is required.
Recommended Action
Introduced Cisco MDS SAN-OS Release 1.2(2a).
ZONE-2-ZS_TCAM_READ_ONLY_ZONE_DISABLED: Read-only zoning disabled :
Read-only zoning disabled. Hard zoning disabled because of a ternary
Explanation
content-addressable memory (TCAM) programming failure.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Reason:
OL-15956-01