Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual page 512

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message ZONE-4-ZS_NON_INTEROPERABLE_ZONE_SET: Non interoperable active
zoneset present on VSAN [dec] in interoperability mode.
Error Message ZONE-4-ZS_QOS_LUN_WARNING: LUN member(s) and QoS attribute are present
in zone [chars] in vsan [dec]. QoS will not be applicable for LUN members.
Error Message
current interoperability mode.
Error Message ZONE-4-ZS_UNSUPPORTED_MEMBER_IN_CURRENT_INTEROP_MODE: Unsupported
member present in active or full zoneset in current interoperability mode.
ZONE-5
Error Message
Cisco MDS 9000 Family System Messages Reference
2-476
Active zone set has non-interoperable members (FC ID, FWWN) when interoperability
Explanation
mode is turned on for the VSAN.
Recommended Action Turn off interoperability mode or make sure that active zone set has only
interoperable members (pWWN).
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
QoS will not be applicable to LUN zone members in zone [chars] in vsan [dec].
Explanation
No action is required.
Recommended Action
ZONE-4-ZS_TOO_MANY_ALIAS_IN_CURRENT_INTEROP_MODE: Too many aliases in
Explanation Too many aliases configured in current interoperability mode on the VSAN. Because
of this, the next zone set activation, distribution, or merge operation may fail.
Either set the interoperability mode to the appropriate value, or make sure the
Recommended Action
number of aliases is less than the maximum allowed in the current interoperability mode.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Active or full zone set has members that are not supported in the current interoperability
Explanation
mode set on the VSAN.
Recommended Action Either set the interoperability mode to the appropriate value, or make sure that
the active or full zone set has only supported members in the current interoperability mode.
Cisco MDS SAN-OS Release 1.3(4a).
Introduced
ZONE-5-ZS_EXPORT_IMPORT_COMPLETE: [chars] operation completed.
The export or import operation completed.
Explanation
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
OL-15956-01