Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual page 273
Cisco mds 9000 family system messages reference (ol-15956-01, april 20078)
Hide thumbs
Also See for AJ732A - Cisco MDS 9134 Fabric Switch:
- Command reference manual (1640 pages) ,
- Configuration manual (700 pages) ,
- Installation manual (288 pages)
Table of Contents
Advertisement
Chapter 2
System Messages and Recovery Procedures for the Cisco MDS 9000 Family
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message
(Isolation due to ELP failure).
Error Message
[chars] is down (Isolation due to ELP failure: class F param error).
Error Message
[chars] is down (Isolation due to ELP failure: class N param error).
Error Message
[chars] is down (Isolation due to ELP failure: invalid payload size).
Error Message
[chars] is down (Isolation due to ELP failure: invalid port name).
OL-15956-01
PORT-5-IF_DOWN_ELP_FAILURE_ISOLATION: Interface [chars] is down
Exchange link parameter (ELP) failed on the interface.
Explanation
Enter the show port internal info CLI command or use a similar Fabric
Recommended Action
Manager/Device Manager procedure to check the ELP failure reason field.
Introduced
Cisco MDS SAN-OS Release 1.2(2a).
PORT-5-IF_DOWN_ELP_FAILURE_ISOLATION_CLASSF_PARAM_ERR: Interface
Exchange link parameter (ELP) failed on the interface because of a class F parameter
Explanation
error.
Configure the attached switch port correctly and try again.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
PORT-5-IF_DOWN_ELP_FAILURE_ISOLATION_CLASSN_PARAM_ERR: Interface
Explanation
Exchange link parameter (ELP) failed on the interface because of a class N parameter
error.
Configure the attached switch port correctly and try again.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
PORT-5-IF_DOWN_ELP_FAILURE_ISOLATION_INVALID_PAYLOAD_SIZE: Interface
Exchange link parameter (ELP) failed on the interface because of an invalid payload
Explanation
size.
Configure the attached switch port correctly and try again.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
PORT-5-IF_DOWN_ELP_FAILURE_ISOLATION_INVALID_PORT_NAME: Interface
Exchange link parameter (ELP) failed on the interface because of an invalid port name.
Explanation
Recommended Action
Configure the attached switch port correctly and try again.
Introduced
Cisco MDS SAN-OS Release 1.2(2a).
Cisco MDS 9000 Family System Messages Reference
2-237
Advertisement
Table of Contents
