Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual page 436

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message SYSTEMHEALTH-2-OHMS_SUP_CF_REFLASH_FAILED: Compact Flash firmware
refresh procedure failed, replace the compact flash on module [dec]. Reason:
[char].
Error Message SYSTEMHEALTH-2-OHMS_SUP_CF_CRC_INIT_ERRORS: Compact Flash firmware
CRC checksum procedure encountered an error during initialization on module [dec].
Reason: [chars].
Error Message SYSTEMHEALTH-2-OHMS_SWITCH_RELOAD_REQ: Switch reload request due to
errors found [chars] test.
Error Message
requested due to errors found [chars] test.
Error Message SYSTEMHEALTH-2-OHMS_TCAM_PARITY_FAILED: TCAM test failed for module
[dec].
Cisco MDS 9000 Family System Messages Reference
2-400
Explanation Compact Flash firmware corrupted.
Schedule a downtime and replace the compact flash on the affected module.
Recommended Action
Cisco MDS SAN-OS Release 3.1(3).
Introduced
Explanation Compact flash CRC checksum initializations failed.
Check the compact flash on the board and any relevant system
Recommended Action
(mis)configurations.
Cisco MDS SAN-OS Release 3.3(1a).
Introduced
Explanation System Health switch reload request.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.3(1).
Introduced
SYSTEMHEALTH-2-OHMS_SWITCHOVER_REQ: Supervisor switch over being
System Health switchover request.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.3(1).
Introduced
TCAM test failed for module as uncorrectable parity errors detected.
Explanation
Schedule a downtime and replace the compact flash on the affected module.
Recommended Action
Introduced Cisco MDS SAN-OS Release 3.3(1a).
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
OL-15956-01