Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual page 392

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message
) Flash Copy mapping started [chars].
Error Message
) Software downgrade complete [chars].
Error Message
Software upgrade complete [chars].
Error Message
Software upgrade started [chars].
Error Message
Virtual Disk created [chars].
Cisco MDS 9000 Family System Messages Reference
2-356
SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_ERR_CFG_TRIGGER_FC_MAPPING
The svctask startfcmap IBM CLI command has been invoked.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.3(1).
Introduced
SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_ERR_CFG_UPGRADE_BACKED_OFF
The software upgrade process failed, and all nodes have been restored to the previous
Explanation
level of code.
Perform problem determination on the cause of the upgrade failure and take
Recommended Action
corrective action before retrying the upgrade.
Cisco MDS SAN-OS Release 1.3(1).
Introduced
SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_ERR_CFG_UPGRADE_COMPLETED )
Explanation All nodes have successfully moved to the new code level, which will now be
committed.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.3(1).
Introduced
SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_ERR_CFG_UPGRADE_STARTED )
The software upgrade process has started (the first node is about to be upgraded).
Explanation
No action is required.
Recommended Action
Introduced Cisco MDS SAN-OS Release 1.3(1).
SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_ERR_CFG_VDISK_CREATE )
The svctask mkvdisk IBM CLI command has been invoked.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.3(1).
Introduced
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
OL-15956-01