Sysmgr-3 - Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual
Cisco mds 9000 family system messages reference (ol-15956-01, april 20078)
Hide thumbs
Also See for AJ732A - Cisco MDS 9134 Fabric Switch:
- Command reference manual (1640 pages) ,
- Configuration manual (700 pages) ,
- Installation manual (288 pages)
Table of Contents
Advertisement
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message SYSMGR-3-CFGSNAPSHOT_FAILED: Configuration snapshot failed (error-id
[hex]).
Error Message
Error Message
[chars]: configuration action already in progress.
Error Message
configuration (error-id [hex]).
Error Message
configuration in the timeout period.
Cisco MDS 9000 Family System Messages Reference
2-380
The requested configuration snapshot has failed. The error message shows the error ID
Explanation
representing the failure reason.
Recommended Action
No action is required.
Introduced
Cisco MDS SAN-OS Release 1.2(2a).
SYSMGR-3-CFGWRITE_FAILED: Configuration copy failed (error-id [hex]).
The requested configuration copy has failed. The error message shows the error ID
Explanation
representing the failure reason.
No action is required.
Recommended Action
Introduced
Cisco MDS SAN-OS Release 1.2(2a).
SYSMGR-3-CFGWRITE_REJECT: Discarding request for configuration
Another instance of the CLI command copy running-config startup-config is in
Explanation
progress.
Recommended Action
Wait for the other instance to complete.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
SYSMGR-3-CFGWRITE_SRVFAILED: Service "[chars]" failed to store its
Explanation
A required service has failed to store its configuration into the startup configuration.
The overall configuration copy is considered failed.
Enter the show process CLI command or use a similar Fabric Manager/Device
Recommended Action
Manager procedure to verify that the system is running properly and the service is behaving
correctly.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
SYSMGR-3-CFGWRITE_SRVTIMEOUT: Service [chars] failed to store its
The listed service failed to respond to a request to store its configuration into the
Explanation
startup-configuration. The overall configuration copy has failed.
If you purchased Cisco support through a Cisco reseller, contact the reseller
Recommended Action
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Cisco MDS SAN-OS Release 2.0(1b).
Introduced
Chapter 2
System Messages and Recovery Procedures for the Cisco MDS 9000 Family
OL-15956-01
Advertisement
Table of Contents
