Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual page 509
Cisco mds 9000 family system messages reference (ol-15956-01, april 20078)
Hide thumbs
Also See for AJ732A - Cisco MDS 9134 Fabric Switch:
- Command reference manual (1640 pages) ,
- Configuration manual (700 pages) ,
- Installation manual (288 pages)
Table of Contents
Advertisement
Chapter 2
System Messages and Recovery Procedures for the Cisco MDS 9000 Family
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message ZONE-2-ZS_TCAM_SWITCHED_TO_SOFT_ZONING_MODE: Switched to soft zoning
:
Error Message ZONE-2-ZS_VIRTUAL_DOMAIN_INCONSISTENT: IVR reporting virtual domain
different from rib and domain manager in vsan [dec].
Error Message ZONE-2-ZS_ZONE_LIMIT_EXCEEDED: The limit for maximum number of zones
exceeded.
Error Message ZONE-2-ZS_ZONE_SET_LIMIT_EXCEEDED: The limit for maximum number of
zonesets exceeded.
ZONE-3
Error Message
OL-15956-01
Reason: Hard zoning disabled.
Switched to soft zoning. Hard zoning was disabled due to a TCAM programming
Explanation
failure.
Recommended Action
No action is required.
Introduced
Cisco MDS SAN-OS Release 3.1(1).
IVR reporting the virtual domain is different from the Routing Information Base (RIB)
Explanation
and Domain Manager in the VSAN.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 3.1(1).
Introduced
Explanation
The number of zones configured has exceeded the maximum number of zones allowed
across all VSANs. Because of this, the distribution or merge operation may fail.
Make sure the number of zones is less than the maximum allowed across all
Recommended Action
VSANs.
Introduced
Cisco MDS SAN-OS Release 2.0(1b).
The number of zone sets configured has exceeded the maximum number of zone sets
Explanation
allowed across all VSANs. Because of this, distribution or merge operation may fail.
Recommended Action
Make sure the number of zone sets is less than the maximum allowed across
all VSANs.
Cisco MDS SAN-OS Release 2.0(1b).
Introduced
ZONE-3-LZ_UNKNOWN_MSG: Recvd. from Node=[dec] SAP=[dec].
The LUN read-only zoning process has received an unknown message. This
Explanation
information is for debugging only.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
Cisco MDS 9000 Family System Messages Reference
2-473
Advertisement
Table of Contents
