Vrrp_Eng-5; Vrrp_Eng-6 - Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message
interface [chars] is down.
Error Message
[chars].
Error Message
Error Message
changed to [chars].
Error Message
request result [chars].
Cisco MDS 9000 Family System Messages Reference
2-446
VRRP_ENG-6-INTERFACE_DOWN: Cannot start the VR [dec] since the
The specified virtual router is enabled but cannot change state from initializing. The
Explanation
specified interface is down or does not have a primary IP address configured.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
VRRP_ENG-6-INTERFACE_STATE_CHANGE: Interface [chars] state changed to
The interface specified has changed state This could have triggered a VRRP status
Explanation
change.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
VRRP_ENG-6-STARTING: VRRP Engine service started.
The service successfully started.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
VRRP_ENG-6-VR_STATE_CHANGE: VR ID [dec] on interface [chars] state
The status of the specified virtual router has changed.
Explanation
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
VRRP_ENG-6-VSHA_RESULT: VR ID [dec] on interface [chars] state change
The result of the request for status change on the virtual router (with VSHA extension)
Explanation
specified is shown in the error message.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
OL-15956-01