Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual page 257
Cisco mds 9000 family system messages reference (ol-15956-01, april 20078)
Hide thumbs
Also See for AJ732A - Cisco MDS 9134 Fabric Switch:
- Command reference manual (1640 pages) ,
- Configuration manual (700 pages) ,
- Installation manual (288 pages)
Table of Contents
Advertisement
Chapter 2
System Messages and Recovery Procedures for the Cisco MDS 9000 Family
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Error Message
Error Message
non-availability of xbar modules.
Error Message
insufficient power (Serial number [chars]).
Error Message
[chars]).
OL-15956-01
PLATFORM-2-FANMOD_FAN_FAIL: Fan module [dec] ([chars] fan) Failed.
Fan module has failed and needs to be replaced. This can lead to overheating and
Explanation
temperature alarms.
Use the show platform internal info CLI command to collect more
Recommended Action
information, or use a similar Fabric Manager procedure.
Cisco MDS SAN-OS Release 3.0(1).
Introduced
PLATFORM-2-FANMOD_FAN_OK: Fan module [dec] ([chars] fan) ok.
Explanation
Fan module is ok.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 3.0(1).
Introduced
PLATFORM-2-MOD_ALL_PWRDN_NOXBAR: All modules powered down due to
All modules in a switch have been powered down because all xbar modules are offline.
Explanation
Recommended Action
Use the CLI commands show module, show platform internal all module
[decimaldigit] and show module internal all module [decimaldigit] to collect more information
if you suspect a module has been powered down because of errors. At least one exbar module has to
be up for switch modules to function.
Cisco MDS SAN-OS Release 3.0(1).'
Introduced
PLATFORM-2-MOD_PWRDENY: Module [dec] can not be powered up due to
Explanation
Available power in power supplies is not sufficient to power up the module.
Verify available power and current usage with the show env power CLI
Recommended Action
command or by using a similar Fabric Manager procedure. See the power supply document on how
to increase power supply capacity.'
Introduced
Cisco MDS SAN-OS Release 3.0(1).
PLATFORM-2-MOD_PWRFAIL: Module [dec] failed to power up (Serial number
The module in the slot named failed to power up.
Explanation
Use the show platform internal all module [decimaldigit] CLI command to
Recommended Action
collect more information.
Introduced
Cisco MDS SAN-OS Release 3.0(1).
Cisco MDS 9000 Family System Messages Reference
2-221
Advertisement
Table of Contents
