Port-Security Messages (Deprecated) - Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

PORT-SECURITY Messages (Deprecated)

This section contains the port security (PORT-SECURITY) messages. These messages were deprecated
in Cisco MDS SAN-OS Release 1.3(4a). They were replaced by the
section on page
PORT-SECURITY-2
Error Message
for [chars].
Error Message PORT-SECURITY-2-FEATURE_DISABLED: Feature [chars] disabled due to
[chars].
PORT-SECURITY-3
Error Message PORT-SECURITY-3-BINDING_CONFLICT: [chars] in VSAN [dec].
OL-15956-01
2-263.
PORT-SECURITY-2-ALLOC_FAILED: Memory allocation failed for size:[dec]
Explanation Memory allocation failed for the entity and size shown in the error message.
If you purchased Cisco support through a Cisco reseller, contact the reseller
Recommended Action
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Cisco MDS SAN-OS Release 1.3(1).
Introduced
Cisco MDS SAN-OS Release 1.3(4a).
Deprecated
The feature is unavailable and will be disabled.
Explanation
Install the correct license and reenable.
Recommended Action
Introduced Cisco MDS SAN-OS Release 1.3(1).
Cisco MDS SAN-OS Release 1.3(4a).
Deprecated
An already logged in device is in conflict with the port security manager (PSM) active
Explanation
binding configurations. The error message indicates the WWN of the login entity, interface and
VSAN.
Use the autolearn feature with activation. This message is informational in
Recommended Action
nature, and the device will not be logged out. However, it will be denied login when it attempts to
log in the next time.
Cisco MDS SAN-OS Release 1.3(1).
Introduced
Cisco MDS SAN-OS Release 1.3(4a).
Deprecated
"PORT_SECURITY Messages"
Cisco MDS 9000 Family System Messages Reference
2-253