Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual page 373

Cisco mds 9000 family system messages reference (ol-15956-01, april 20078)
Hide thumbs Also See for AJ732A - Cisco MDS 9134 Fabric Switch:
Table of Contents

Advertisement

Chapter 2
System Messages and Recovery Procedures for the Cisco MDS 9000 Family
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message
SS_EID_IC_EV_UPGRADE_PCK_DELIVERY_FAILED ) Software install package cannot be
delivered to all nodes [chars].
Error Message
Connection to a configured remote cluster has been lost [chars].
Error Message
Copy suffered loss of synchronization [chars].
Error Message
Copy suffered persistent error [chars].
Error Message
Remote Copy retry timeout [chars].
OL-15956-01
SVC-4-NODE_WARNING_MSG: (SVC [dec]/[dec]
Explanation
An error occurred while sending the software package to the nodes.
1. Display the status of the nodes on the cluster. 2. If any node is offline,
Recommended Action
perform problem determination on the node and bring the node back online. Or, alternatively, delete
the offline node from the cluster. 3. Retry the software upgrade command. 4. If the installation fails
again, report the problem to your customer support representative.
Cisco MDS SAN-OS Release 1.3(1).
Introduced
SVC-4-NODE_WARNING_MSG: (SVC [dec]/[dec] SS_EID_PL_ER_PLIC_LINK )
This cluster can no longer communicate with the remote copy partner cluster.
Explanation
Recommended Action
Perform problem determination on the network and the other cluster.
Cisco MDS SAN-OS Release 1.3(1).
Introduced
SVC-4-NODE_WARNING_MSG: (SVC [dec]/[dec] SS_EID_RC_ER_LSYNC ) Remote
Explanation
In a remote-copy operation, the relationship has stopped and lost synchronization, for
a reason other than a continuous I/O error.
1. Correct higher priority errors, and then restart the remote copy. 2. Mark the
Recommended Action
error you have just repaired as fixed.
Introduced
Cisco MDS SAN-OS Release 1.3(1).
SVC-4-NODE_WARNING_MSG: (SVC [dec]/[dec] SS_EID_RC_ER_PERS ) Remote
A remote copy relationship has been stopped because of a continuous I/O error.
Explanation
1. Correct the higher priority errors, and then retry the remote copy task. 2.
Recommended Action
Mark the error you have just repaired as fixed.
Cisco MDS SAN-OS Release 1.3(1).
Introduced
SVC-4-NODE_WARNING_MSG: (SVC [dec]/[dec] SS_EID_RC_ER_TIMEOUT )
Explanation
Remote copy cannot find a path to the device in the remote cluster within the timeout
period.
Perform problem determination on the node.
Recommended Action
Cisco MDS SAN-OS Release 1.3(1).
Introduced
Cisco MDS 9000 Family System Messages Reference
2-337

Advertisement

Table of Contents
loading

Table of Contents