Aaa-1; Acl Messages - Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
AAA-2
Error Message
[chars].
Error Message
AAA-3
Error Message
AAA-6
Error Message

ACL Messages

This section contains the access control list (ACL) messages.
OL-15956-01
Introduced Cisco MDS SAN-OS Release 1.3(1).
AAA-2-AAA_NVRAM_UPGRADE_FAILURE: upgrading of accounting log failed.
Explanation The accounting log could not be upgraded because of a problem with NVRAM. The
problem is described in the error message.
If you purchased Cisco support through a Cisco reseller, contact the reseller
Recommended Action
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 2.0(1b).
AAA-2-AAA_PROGRAM_EXIT: aaa daemon exiting: [chars].
The AAA daemon is exiting.
Explanation
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Cisco MDS SAN-OS Release 1.3(1).
Introduced
AAA-3-AAA_NVRAMFAILURE: nvram failure.
NVRAM is not accessible. The accounting log cannot be stored in NVRAM.
Explanation
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Cisco MDS SAN-OS Release 1.3(1).
Introduced
AAA-6-AAA_ACCOUNTING_MESSAGE: [chars].
Accounting message.
Explanation
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.3(1).
Cisco MDS 9000 Family System Messages Reference
2-5