Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual page 419

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message
but uses UUID [hex].
Error Message SYSMGR-3-ISSU_BEGIN_FAILED:
Error Message SYSMGR-3-MISSING_OPTIONAL_CAPABILITY: Incomplete support for the
current running-config on standby supervisor.
Error Message
reset (error-id [hex]).
Error Message
warm (error-id [hex]).
OL-15956-01
SYSMGR-3-INVALID_UUID: Service [chars] is configured with UUID [hex],
The identity of a service is inconsistent in the image file.
Explanation
If you purchased Cisco support through a Cisco reseller, contact the reseller
Recommended Action
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
This message indicates that a service has blocked the nondisruptive upgrade.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 3.1(1).
Introduced
Loose configuration incompatibilities exist between active and standby supervisors.
Explanation
Operational redundancy mode is still set to high availability.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
SYSMGR-3-MODULE_LOCK_FAILED: Failed to lock the local module to avoid
Locking the local module has failed. Reloading the local module may now cause
Explanation
switchover to fail.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
SYSMGR-3-OPERATIONAL_MODE_WARM: Operational redundancy mode set to
Operational redundancy mode will be set to warm. The error message shows the error
Explanation
ID representing the reason.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
ISSU cannot proceed (error-id [hex]).
Cisco MDS 9000 Family System Messages Reference
2-383