Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual page 278
Cisco mds 9000 family system messages reference (ol-15956-01, april 20078)
Hide thumbs
Also See for AJ732A - Cisco MDS 9134 Fabric Switch:
- Command reference manual (1640 pages) ,
- Configuration manual (700 pages) ,
- Installation manual (288 pages)
Table of Contents
Advertisement
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message PORT-5-IF_DOWN_INCOMPATIBLE_ADMIN_MODE: Interface [chars] is down
(Error disabled - Incompatible admin port mode).
Error Message PORT-5-IF_DOWN_INCOMPATIBLE_ADMIN_RXBBCREDIT: Interface [chars] is
down (Error disabled - Incompatible admin port rxbbcredit).
Error Message PORT-5-IF_DOWN_INCOMPATIBLE_ADMIN_RXBUFSIZE: Interface [chars] is
down (Error disabled - Incompatible admin port rxbufsize).
Error Message PORT-5-IF_DOWN_INCOMPATIBLE_ADMIN_SPEED: Interface [chars] is down
(Error disabled - Incompatible admin port speed).
Error Message PORT-5-IF_DOWN_INITIALIZING: Interface [chars] is down (Initializing).
Cisco MDS 9000 Family System Messages Reference
2-242
The configured mode is not supported on this interface.
Explanation
Enter the show port internal info command or use a similar Fabric Manager
Recommended Action
procedure to determine the list of modes supported on this interface.
Introduced
Cisco MDS SAN-OS Release 1.2(2a).
The configured receive B2B credit size is not supported.
Explanation
Enter the show port internal info command or use a similar Fabric Manager
Recommended Action
procedure to get the allowed receive B2B credit size.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
Explanation
The configured receive buffer size is not supported.
Enter the show port internal info command or use a similar Fabric Manager
Recommended Action
procedure to get the allowed receive buffer size.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
The configured speed is not supported on this interface.
Explanation
Enter the show port internal info command or use a similar Fabric Manager
Recommended Action
procedure to determine the range of speed supported on this interface.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
Explanation
The interface is in the process of coming up.
If the interface is stuck in this state for a while, enter the show port internal
Recommended Action
event-history command or use a similar Fabric Manager procedure to determine what it is waiting
for.
Introduced
Cisco MDS SAN-OS Release 1.2(2a).
Chapter 2
System Messages and Recovery Procedures for the Cisco MDS 9000 Family
OL-15956-01
Advertisement
Table of Contents
