Wwn-5; Wwn-6 - Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Error Message
Error Message
Error Message
manager: Reason=[chars].
Error Message
Error Message
OL-15956-01
WWN-6-BECAME_ACTIVE: Became ACTIVE from standby mode.
The WWN manager on the standby supervisor module became active and it is ready to
Explanation
serve client requests for WWNs.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
WWN-6-BECAME_STDBY: Became STANDBY from active mode.
The WWN manager became standby from active mode.
Explanation
No action is required.
Recommended Action
Introduced Cisco MDS SAN-OS Release 1.2(2a).
WWN-6-EXCESSIVE_DELAY: [chars].
Excessive time taken for a processing event. The description of the event is shown in
Explanation
the error message.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
WWN-6-FAILED_TO_SEND_HEARTBEAT: Failed to send heartbeat to system
The WWN manager was unable to send a heartbeat to the system manager.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
WWN-6-GENERAL_EVENT: [chars].
Explanation The WWN manager has generated an important event. The description of the event is
shown in the error message.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
WWN-6-PSS_CREATED: [chars] PSS Created.
One of the persistent information databases of the WWN manager has been recreated.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
Cisco MDS 9000 Family System Messages Reference
2-457