Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual page 260

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message
[dec].
Error Message PLATFORM-2-PFM_LOW_MEMORY_CONDITION: Module [dec] is running low on
memory. %ld percent used.
Error Message PLATFORM-2-PFM_LC_STATUS: Module [dec] powered up with [dec] status.
Error Message PLATFORM-2-PFM_PWR_MGMT_EPLD_VER_MISMATCH: Module [dec] Pwr Mgmt Epld
(Version-[dec]) needs to be upgraded.
Error Message PLATFORM-2-PFM_STDBY_POWERUP_FAIL: standby supervisor failed to power
up.
Cisco MDS 9000 Family System Messages Reference
2-224
PLATFORM-2-PFM_LC_REGISTRATION_FAIL: Could not register with Module
Module registration failed.
Explanation
Replace the module.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
Supervisor is running low on memory.
Explanation
Recommended Action Switchover.
Introduced Cisco MDS SAN-OS Release 3.2(1).
Status for module that failed registration.
Explanation
Replace the module.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
Explanation the ELPD needs to be upgraded. Using a wrong version of EPLD can result in
unexplained behaviour.
Upgrade the power managment EPLD. Refer to the Cisco MDS 9000 Family
Recommended Action
CLI Configuration Guide.
Introduced Cisco MDS SAN-OS Release 3.0(1).
Standby supervisor failed to power up.
Explanation
Replace the standby supervisor.
Recommended Action
Cisco MDS SAN-OS Release 3.0(1).
Introduced
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
OL-15956-01