Configuring The Time Zone - Cisco Catalyst 9200 Configuration Manual

Administering the Device
Follow these steps to set the system clock:
SUMMARY STEPS
1. enable
2. Use one of the following:
DETAILED STEPS
Command or Action
Step 1 enable
Example:
Device> enable
Step 2
Use one of the following:
• clock set hh:mm:ss day month year
• clock set hh:mm:ss month day year
Example:
Device# clock set 13:32:00 23 March 2013

Configuring the Time Zone

Follow these steps to manually configure the time zone:
SUMMARY STEPS
1. enable
2. configure terminal
3. clock timezone zone hours-offset [minutes-offset]
4. end
5. show running-config
6. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1
enable
Example:
• clock set hh:mm:ss day month year
• clock set hh:mm:ss month day year
System Management Configuration Guide, Cisco IOS XE Gibraltar 16.10.x (Catalyst 9200 Switches)
Purpose
Enables privileged EXEC mode. Enter your password if
prompted.
Manually set the system clock using one of these formats:
• hh:mm:ss Specifies the time in hours (24-hour
format), minutes, and seconds. The time specified is
relative to the configured time zone.
• day Specifies the day by date in the month.
• month Specifies the month by name.
• year Specifies the year (no abbreviation).
Purpose
Enables privileged EXEC mode. Enter your password if
prompted.
Configuring the Time Zone
11