Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual page 59

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message
[chars].
Error Message
packets - [chars].
CDP-6
Error Message
Error Message
Error Message
OL-15956-01
CDP-3-SOCKBINDFAIL: Failed to bind to raw socket, interface [hex] -
The Cisco Discovery Protocol failed to bind to a raw socket. The error message
Explanation
identifies the interface and the reason for this failure.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
CDP-3-SOCKOPENFAIL: Failed to open socket for receiving raw 802_2
An attempt to open a socket for receiving raw 802.2 packets failed due to the reason
Explanation
shown in the error message.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
CDP-6-CDPDUP: CDP Daemon Up.
The Cisco Discovery Protocol daemon was created successfully and is up and running.
Explanation
This is an informational message.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
CDP-6-CDPEXIT: CDP daemon shutting down gracefully.
Explanation The Cisco Discovery Protocol daemon is shutting down gracefully.
This is an informational message.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
CDP-6-PORTDISABLE: CDP disabled on port [chars].
The Cisco Discovery Protocol was disabled on a port. The error message shows the
Explanation
Interface-ID string that identifies the port.
This is an informational message.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
Cisco MDS 9000 Family System Messages Reference
2-23