Svc_Battery-Slot#-4; Svc_Battery-Slot#-6; Sysmgr Messages - Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message
[dec] completed successfully.
Error Message
[dec] resumed.
Error Message
[dec] started.

SYSMGR Messages

This section contains the system manager (SYSMGR) messages.
SYSMGR-2
Error Message
but tried a regular handshake. Discarding request.
Error Message SYSMGR-2-CFGERASE_ABORTED: Write erase aborted.
Cisco MDS 9000 Family System Messages Reference
2-362
SVC_BATTERY-SLOT#-6-CONDITIONING_COMPLETED: Conditioning of battery
Conditioning process started for a battery is completed successfully.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.3(1).
Introduced
SVC_BATTERY-SLOT#-6-CONDITIONING_RESUMED: Conditioning of battery
Conditioning process for a battery is resumed.
Explanation
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.3(1).
SVC_BATTERY-SLOT#-6-CONDITIONING_STARTED: Conditioning of battery
Conditioning process started for a battery.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.3(1).
Introduced
SYSMGR-2-BOOTSCOPE_HANDSHAKE: Service [chars] is in the boot scope,
A service is trying to take actions that belong to a different class of services.
Explanation
If you purchased Cisco support through a Cisco reseller, contact the reseller
Recommended Action
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
Write erase has failed.
Explanation
Use the other system messages to verify that the problem has been corrected,
Recommended Action
and try again.
Cisco MDS SAN-OS Release 2.1(1a).
Introduced
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
OL-15956-01