Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual page 214

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message
[chars] failed with error [hex].
Error Message
Error Message IVR-3-ROUTE_REQUEST_TO_ACL_FAILED: route [chars] request vsan [dec]
domain [dec] failed:[chars].
Error Message IVR-3-TOPOLOGY_COMPUTATION_FAILED: Inter-VSAN Topology computation
has failed due to: [chars].
Error Message
received.
Cisco MDS 9000 Family System Messages Reference
2-178
IVR-3-PSS_RTDB_RESTORE_ERROR: Runtime database restoration for
IVR read the saved runtime database and encountered an error while rebuilding the
Explanation
runtime database. The error message describes the runtime database that the process tried to restore
and shows the system error code.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.3(1).
Introduced
IVR-3-RIB_ERROR: RIB API, [chars], failed with error [hex].
IVR invoked the Routing Information Base (RIB) API and received an error code. The
Explanation
error message describes the API and the error.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.3(1).
Introduced
This happens when either after IVR retried the request few times or ACL experienced
Explanation
error while processing the request.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 3.0(1).
Introduced
Inter-VSAN topology has failed because of the reason shown in the message. Possible
Explanation
reasons are (a) number of AFID/VSAN combination is more than the maximum supported value of
128, or (b) number of IVR-enabled switches is more than the maximum supported value of 128.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 2.1(1a).
Introduced
IVR-3-UNEXPECTED_MTS_MSG: Unexpected MTS message, opcode [dec], is
IVR process received an unexpected message and transaction service (MTS) event. The
Explanation
MTS opcode is specified in the error message.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.3(1).
Introduced
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
OL-15956-01