Vpm-2 - Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Error Message
Error Message
Error Message VPM-2-VPMON_DPP_RELOAD_FORCE: Issuing of force reload to command for
DPP(s) [chars] is: [chars].
VPM-3
Error Message
Cisco MDS 9000 Family System Messages Reference
2-436
VPM-2-PSS_ERROR: [chars].
The virtual port manager encountered an error while operating on a persistent storage
Explanation
database.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
VPM-2-VPMON_CRIT: [chars] [dec].
The virtual port manager (VPMON) daemon experienced a critical problem.
Explanation
No action is required.
Recommended Action
Introduced Cisco MDS SAN-OS Release 2.0(1b).
VPM-2-VPMON_DPP_DOWNLOAD: HB failure, Restarting the DPP [dec].
The virtual port manager (VPMON) daemon is downloading the data path processor
Explanation
(DPP) again.
Intelligent switch application programming interface (ISAPI) users need to
Recommended Action
re-download the configuration data to the fast path.
Cisco MDS SAN-OS Release 2.0(1b).
Introduced
VPMON daemon critical action message. Reason is shown in the message.
Explanation
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 2.1(1a).
VPM-3-PSS_SYNC_TO_STNDBY_FAILED: PSS TYPE=[chars] KEY=[chars].
Could not send persistent storage service (PSS) synchronization notification to the
Explanation
standby supervisor. The PSS type, operation, and key are shown in the error message.
No action is required.
Recommended Action
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
OL-15956-01