Sksd Message; Span Messages - Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

SKSD Message

Error Message SKSD-5-SKSD_MKEY_INSTALL:
smartcard(s).

SPAN Messages

This section contains the switched port analyzer (SPAN) messages.
SPAN-2
Error Message
SPAN-3
Error Message
Error Message
OL-15956-01
Explanation Installing a new Master Key on the smart card(s).
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 3.0(1).
Introduced
SPAN-2-MEM_FULL: Memory allocation failed.
Memory allocation failed.
Explanation
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
SPAN-3-IPC_FAIL: IPC Error.
Internal interprocess communications (IPC) error.
Explanation
No action is required.
Recommended Action
Introduced Cisco MDS SAN-OS Release 1.2(2a).
SPAN-3-STATELESS_RESTART: Span is restarting stateless.
Because of an unrecoverable error, the switched port analyzer (SPAN) is starting
Explanation
stateless. The currently active sessions will not be preserved. You will have to reenter the entire
configuration.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
Cisco MDS SAN-OS Release 1.3(1).
Deprecated
Installing a Master Key on the
Cisco MDS 9000 Family System Messages Reference
2-311