Module Messages - Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

MODULE Messages

This section contains the module messages.
MODULE-2
Error Message MODULE-2-LCM_UPGRADE_DONE_GENERAL_FAIL: Upgrade ready message fails
seq [dec].
Error Message MODULE-2-LCM_UPGRADE_OVER_FAIL: Upgrade over message returned [dec]
[hex] for SAP [dec].
Error Message MODULE-2-LCM_UPGRADE_READY_FAIL: Upgrade ready message returned [dec]
[hex] for SAP [dec].
Error Message MODULE-2-LCM_UPGRADE_READY_GENERAL_FAIL: Upgrade ready message fails
seq [dec].
Error Message MODULE-2-MOD_DIAG_FAIL: Module [dec] reported failure on ports
[dec]/[dec]-[dec]/[dec] ([chars]) due to [chars] in device [dec] (device error
[hex]).
OL-15956-01
Upgrade ready message failed.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 3.1(1).
Introduced
Upgrade done message failed.
Explanation
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.1(1).
Upgrade ready message failed.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 3.1(1).
Introduced
Upgrade ready message failed.
Explanation
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.1(1).
The module reported a failure in the runtime diagnostic. Module manager is going to
Explanation
power cycle the module.
Collect information about the module by entering the show module internal
Recommended Action
all module [decimaldigit] CLI command or by using a similar Fabric Manager procedure.
Cisco MDS 9000 Family System Messages Reference
2-197