Xbar-3; Xbar-5 - Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message
module [dec].
Error Message XBAR-5-XBAR_INIT_FAIL: Xbar [[dec].[dec]] reported failure durinig
intialization return_code [hex] ([chars]).
Error Message
Error Message XBAR-5-XBAR_INIT_FAILURE: Xbar [chars] initialization failed.
Error Message XBAR-5-XBAR_PORT_CHECK_SYNC_FAIL: Xbar [[dec].[dec]] reported failure
to check sync on port [dec] return_code [hex] ([chars]).
Error Message
failure to continue sync on port [dec] return_code [hex] ([chars]).
Cisco MDS 9000 Family System Messages Reference
2-460
XBAR-5-MOD_CONNECTION_REATTEMPT: Re-attempting Xbar connection with
The module has experienced a setup failure on connecting the module to the fabric.
Explanation
Enter the show xbar internal event-history command or use a similar Fabric
Recommended Action
Manager/Device manager procedure to collect more informations about the crossbar component.
Power cycling the module may fix the problem.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
The supervisor has experienced an xbar setup failure.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 3.0(1).
Introduced
The supervisor module has experienced a fabric initialization failure. The supervisor
Explanation
module rebooted. In case of dual supervisors, a switchover will occur.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a)
The supervisor has experienced an xbar setup failure.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 3.0(1).
Introduced
XBAR-5-XBAR_PORT_CONTINUE_SYNC_FAIL: Xbar [[dec].[dec]] reported
The supervisor has experienced an xbar setup failure.
Explanation
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.0(1).
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
OL-15956-01