Svc-7; Svc_Battery-Slot#-2 - Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual
Cisco mds 9000 family system messages reference (ol-15956-01, april 20078)
Hide thumbs
Also See for AJ732A - Cisco MDS 9134 Fabric Switch:
- Command reference manual (1640 pages) ,
- Configuration manual (700 pages) ,
- Installation manual (288 pages)
Table of Contents
Advertisement
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message
present.
Error Message
range for battery charging (5C-40C).
Error Message
[dec] ([hex]).
Error Message
battery conditioning will be affected.
Error Message
with battery [dec].
Cisco MDS 9000 Family System Messages Reference
2-360
SVC_BATTERY-SLOT#-2-BATTERY_NOT_PRESENT: Battery [dec] is not
The module does not have a sufficient number of batteries. Two batteries are needed.
Explanation
If you purchased Cisco support through a Cisco reseller, contact the reseller
Recommended Action
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced
Cisco MDS SAN-OS Release 1.3(1).
SVC_BATTERY-SLOT#-2-CHARGING_DISABLED: Temperature outside permitted
The temperature of the module is not within the range to permit battery charging.
Explanation
Make sure the temperature of the module is between 5 and 40
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
SVC_BATTERY-SLOT#-2-CHARGING_FAILURE: Charging failure in battery
The module encountered failures while charging a battery.
Explanation
Recommended Action
Replace the battery.
Cisco MDS SAN-OS Release 1.3(1).
Introduced
SVC_BATTERY-SLOT#-2-CLOCK_INCORRECT: System clock is running behind,
Explanation
The system clock is running behind the actual time. This will affect the battery
conditioning.
Enter the clock set CLI command or use an equivalent Fabric Manager/Device
Recommended Action
Manager procedure to set the correct time.
Introduced
Cisco MDS SAN-OS Release 1.2(2a).
SVC_BATTERY-SLOT#-2-COMMUNICATION_FAILURE: Communication failure
The module encountered failures while communicating with a battery.
Explanation
Replace the battery. If you purchased Cisco support through a Cisco reseller,
Recommended Action
contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco
Technical Support.
Cisco MDS SAN-OS Release 1.3(1).
Introduced
Chapter 2
System Messages and Recovery Procedures for the Cisco MDS 9000 Family
0
C.
OL-15956-01
Advertisement
Table of Contents
