Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual page 379

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message
) Flash Copy Prepared [chars].
Error Message
SS_EID_IC_EV_CLUSTER_RECOVERY_COMPLETE ) Cluster recovery completed [chars].
Error Message
node in the IO group is not available [chars].
Error Message
SS_EID_IC_EV_SECURE_DELETE_COMPLETE ) Virtual Disk format completed [chars].
Error Message
software started [chars].
OL-15956-01
SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_EID_FC_ER_PREPARE_COMPLETED
The flash copy mapping or consistency group has entered the prepared state. It is now
Explanation
possible to start or stop the mapping or group.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.3(1).
SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec]
Cluster recovery has completed successfully.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.3(1).
Introduced
SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_EID_IC_EV_IOGRP_ONE_OK ) One
Following node remove by the user, there is only one node left in the IO group.
Explanation
Recommended Action No action is required.
Cisco MDS SAN-OS Release 1.3(1).
Introduced
SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec]
Explanation The formatting (writing all zeros) to new extents of the virtual disk has completed.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.3(1).
Introduced
SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_EID_PL_ER_COLDSTART ) Node
The node software has been started (cold start).
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.3(1).
Introduced
Cisco MDS 9000 Family System Messages Reference
2-343