Zone Messages - Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

ZONE Messages

This section contains the zone messages.
ZONE-2
Error Message
[chars].
Error Message
Error Message
failed at [chars].
Error Message
Cisco MDS 9000 Family System Messages Reference
2-464
ZONE-2-LZ_EXITING: LUN/Read-only Zoning Process exited. Reason:
The LUN read-only zoning process has exited because of the reason shown in the error
Explanation
message . The process restarted automatically.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
ZONE-2-LZ_GENERAL_ERROR: [chars].
The LUN read-only zoning process has encountered a critical error. The description of
Explanation
error is shown in the error message.
No action is required.
Recommended Action
Introduced Cisco MDS SAN-OS Release 1.2(2a).
ZONE-2-LZ_INIT_FAILED: Initialization of LUN/Read-only Zoning Process
Initialization of LUN read-only zoning process failed.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
ZONE-2-LZ_MALLOC_ERROR: Size [dec] bytes.
The LUN read-only zoning process could not allocate memory.
Explanation
Copy the error message exactly as it appears on the console or in the system
Recommended Action
log. If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you
purchased support directly from Cisco Systems, contact Cisco Technical Support.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
OL-15956-01