Fcdomain-2 - Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual
Cisco mds 9000 family system messages reference (ol-15956-01, april 20078)
Hide thumbs
Also See for AJ732A - Cisco MDS 9134 Fabric Switch:
- Command reference manual (1640 pages) ,
- Configuration manual (700 pages) ,
- Installation manual (288 pages)
Table of Contents
Advertisement
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message
[chars]).
Error Message
failed.
Error Message
Error Message
table is completely full.
Cisco MDS 9000 Family System Messages Reference
2-74
FCDOMAIN-2-EPORT_ISOLATED: Isolation of interface [chars] (reason:
The domain manager has isolated the interface because of the reason shown in the error
Explanation
message. Enter show interface. Based on the reason specified, you might have to reinitialize the
port or ensure the domains are adequate and unique in the VSAN and perform a disruptive restart
by entering fcdomain restart disruptive.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
FCDOMAIN-2-FC2_INITIALIZATION_FAILED: FC initialization sequence
Explanation
The domain manager process has not been able to complete the initialization sequence
with the FC (Fibre Channel) subsystem. The domain manager depends on resources not available at
the moment. The switch might be short in memory or some other component might be unable to
provide the necessary information to the domain manager.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
FCDOMAIN-2-FC2BIND_FAILED: Bind to FC2 Service failed.
The domain manager has not been able to contact the FC2 module.
Explanation
Recommended Action
If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
FCDOMAIN-2-FCID_PERSISTENT_TBL_COMPLETELY_FULL: FCID persistent
The domain manager has the FC ID persistent table full with entries. Enter show
Explanation
fcdomain fcid persistent to view the entries currently in the table. No more entries can be saved as
persistent FC IDs across reboots.
Enter purge fcdomain fcid to purge stale entries and to obtain more free
Recommended Action
entries. Alternatively, you can disable the feature on certain VSANs which are not critical using no
fcdomain fcid persistent.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
Chapter 2
System Messages and Recovery Procedures for the Cisco MDS 9000 Family
OL-15956-01
Advertisement
Table of Contents
