Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual page 349

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
SPAN-5
Error Message SPAN-5-ATL_VSAN_DEFAULT_ALL: Default to all VSANs for SPAN egress
session.
Error Message SPAN-5-SPAN_CFG_REJECT_SRC_VSAN_FILTER_NOT_SUPPORTED: Source
interface [[chars]] in dir [[chars]] removed from session [[dec]].
Error Message SPAN-5-SPAN_CFG_REJECT_VSAN_SRC_PRESENT: Source VSAN [[dec]] removed
from session [[dec]].
Error Message
corruption.
Error Message
OL-15956-01
Explanation Generation 2 fabric switches support only one VSAN filter for an egress SPAN session.
If a VSAN is specified, SPAN will default to use all VSANs for the egress SPAN session.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 3.1(1).
Introduced
Interface level VSAN filters are not supported.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
Source VSANs were removed from the session because mixing of the interface and
Explanation
VSANs is not supported.
No action is required.
Recommended Action
Introduced Cisco MDS SAN-OS Release 1.2(2a).
SPAN-5-SPAN_PSS_CORRUPTION: Span is starting stateless due to pss
Because of an unrecoverable persistent storage service (PSS) corruption error, the
Explanation
switched port analyzer (SPAN) starts stateless without any configuration.
Recommended Action No action is required.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
SPAN-5-STATELESS_RESTART: Span is restarting stateless.
Because of an unrecoverable error, the switched port analyzer (SPAN) is starting
Explanation
stateless. The currently active sessions will not be preserved. You will have to reenter the entire
configuration.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.3(1).
Introduced
Cisco MDS 9000 Family System Messages Reference
2-313