Rib-4; Rlir Messages - Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message RIB-4-WARN: [chars].
RIB-5
Error Message
RIB-6
Error Message

RLIR Messages

This section contains the Registered Link Incident Record (RLIR) messages.
RLIR-2
Error Message
code [dec].
OL-15956-01
The Routing Information Base (RIB) ignored the unexpected condition.
Explanation
Recommended Action Enter the debug rib all command, or use a similar Fabric Manager procedure,
then recreate the operation scenario to find out more details.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
RIB-5-NOTE: [chars].
The Routing Information Base (RIB) does not support this operation.
Explanation
Recommended Action Enter the debug rib all command, or use a similar Fabric Manager procedure,
then recreate the operation scenario to find out more details.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
RIB-6-INFO: [chars].
The Routing Information Base (RIB) event occurred.
Explanation
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
RLIR-2-DRLIR_REJECT: DRLIR rejected: [chars]: fcid [chars], reason
Explanation Distributed Registered Link Incident Record (DRLIR) was rejected. The FC ID and
reason code are shown in the error message.
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.3(1).
Introduced
Cisco MDS 9000 Family System Messages Reference
2-287