Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual page 441

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message SYSTEMHEALTH-4-OHMS_INBAND_TEST_ERRORS: Too many errors while running
the inband test.
Error Message SYSTEMHEALTH-4-OHMS_LC_DAEMON_EXITED: System Health process running on
module [dec] exited due to internal errors. Will attempt to restart.
Error Message
on module [dec] failed due to fatal errors.
Error Message
running on module [dec] restarted.
Error Message
proceed due to internal errors for module [dec].
Error Message SYSTEMHEALTH-4-OHMS_MOD_SNAKE_PATH_FAILURE: Snake Loopback data path
failure on module [dec].
OL-15956-01
Inband test has had too many errors while running.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.3(1).
Introduced
Online system health line card (OHMS LC) daemon exited.
Explanation
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.3(4b).
SYSTEMHEALTH-4-OHMS_LC_DAEMON_FAILED: System Health process running
Online system health line card (OHMS LC) daemon failed.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.3(1).
Introduced
SYSTEMHEALTH-4-OHMS_LC_DAEMON_RESTARTED: System Health process
Online system health line card (OHMS LC) daemon restarted.
Explanation
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.3(4a).
SYSTEMHEALTH-4-OHMS_MOD_SNAKE_TEST_ERRORS: Snake Loopback test cannot
Snake test internal errors.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.3(1).
Introduced
Snake data path only error.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 3.0(1).
Introduced
Cisco MDS 9000 Family System Messages Reference
2-405