Chapter 2
System Messages and Recovery Procedures for the Cisco MDS 9000 Family
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
BOOTVAR-6
Error Message
Error Message
Error Message
CALLHOME Messages
This section contains the Call Home (CALLHOME) messages.
CALLHOME-2
Error Message
OL-15956-01
Introduced
Cisco MDS SAN-OS Release 1.3(4a).
BOOTVAR-6-ALREADY_IN_SYNC: Image already in sync.
No need to update the image on the standby supervisor.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
BOOTVAR-6-CONFIG_UPDATED: Boot configuration updated.
The boot-loader configuration files have been successfully updated.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
BOOTVAR-6-STARTING: Boot configuration initialized.
The service has successfully started.
Explanation
No action is required.
Recommended Action
Introduced
Cisco MDS SAN-OS Release 1.3(4a).
CALLHOME-2-EVENT: [chars].
A Call Home event occurred.
Explanation
Recommended Action
If you have configured your e-mail address to receive Call Home notifications,
check your e-mail for more details about this Call Home event. If Call Home was not enabled, use
either CLI commands or Cisco Fabric Manager procedures to get more information about the error.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
Cisco MDS 9000 Family System Messages Reference
2-19