Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual page 356
Cisco mds 9000 family system messages reference (ol-15956-01, april 20078)
Hide thumbs
Also See for AJ732A - Cisco MDS 9134 Fabric Switch:
- Command reference manual (1640 pages) ,
- Configuration manual (700 pages) ,
- Installation manual (288 pages)
Table of Contents
Advertisement
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Logical Fibre Channel port missing [chars].
Error Message
Logical Fibre Channel port reported not operational [chars].
Error Message
Node warmstarted due to software error [chars].
Error Message
Power domain error [chars].
Error Message
SS_EID_VG_ER_MDISK_GROUP_OFFLINE ) A Managed Disk group is offline [chars].
Cisco MDS 9000 Family System Messages Reference
2-320
SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] SS_EID_PL_ER_FC_ADAP_QUANTITY )
No active and functioning Fibre Channel port was detected by the software.
Explanation
Reload the node. If the problem persists, replace the Caching Services Module.
Recommended Action
Cisco MDS SAN-OS Release 1.3(1).
Introduced
SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] SS_EID_PL_ER_FC_PORT_QUANTITY )
No active and functioning logical Fibre Channel port was detected by the software.
Explanation
Recommended Action
Reload the node. If the problem persists, replace the Caching Services Module.
Introduced
Cisco MDS SAN-OS Release 1.3(2a).
SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] SS_EID_PL_ER_NODE_WARMSTART )
The error that is logged in the cluster error log indicates a software problem in the
Explanation
cluster.
Recommended Action
1. Ensure that the software is at the latest level on the cluster. 2. Run a
configuration dump and a logged data dump. Save the dump data. 3. Ask your customer support
representative for assistance. 4. Mark the error you have just repaired as fixed.
Cisco MDS SAN-OS Release 1.3(1).
Introduced
SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] SS_EID_PL_ER_POWER_DOMAIN )
The two nodes in an I/O group are on the same Caching Services Module.
Explanation
Determine what the configuration should be. Remove one of the nodes and add
Recommended Action
a node to the I/O group that is not on the same Caching Services Module.
Cisco MDS SAN-OS Release 1.3(1).
Introduced
SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec]
A managed disk group is offline.
Explanation
Recommended Action
1. Repair the enclosure or disk controller. 2. Start a cluster discovery
operation. 3. Check managed disk status. If all managed disks show a status of online, mark the error
you have just repaired as fixed.
Cisco MDS SAN-OS Release 1.3(1).
Introduced
Chapter 2
System Messages and Recovery Procedures for the Cisco MDS 9000 Family
OL-15956-01
Advertisement
Table of Contents
