San Device Virtualization Messages - Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message
failed due to error: [hex].
Error Message
val:[hex] failed due to error: [hex].
SCSI target-7
Error Message
VSAN:[dec] FCID:[hex] prlisparm:[hex].

SAN Device Virtualization Messages

This section contains SAN Device Virtualization (SDV) messages.
SDV-6
Error Message SDV-6-BCAST_NOT_SUPPORTED: Broadcast attribute will be ignored for SDV
devices.
OL-15956-01
SCSI target-3-PSS_SNAPSHOT_FAIL: pss snapshot runtime to uri:[chars]
SCSI target process persistent storage service (PSS) snapshot of runtime to uri failed
Explanation
because of the error shown in the error message.
Recommended Action Enter the show flash command or use a similar Fabric Manager/Device
Manager procedure to collect more information. See PSS system error codes for the reason.
Cisco MDS SAN-OS Release 2.0(1b).
Introduced
SCSI target-3-PSS_STORE_FAIL: pss store runtime entry key:[hex]
SCSI target process persistent storage service (PSS) store runtime entry key failed
Explanation
because of the error shown in the error message.
Enter the show flash command or use a similar Fabric Manager/Device
Recommended Action
Manager procedure to collect more information. See PSS system error codes for the reason.
Cisco MDS SAN-OS Release 2.0(1b).
Introduced
SCSI target-7-SCSI_TARGET_DISCOVERED: SCSI target discovered
SCSI target process discovered a VSAN with the FC ID and PRLI service parameter
Explanation
shown in the error message
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 2.0(1b).
Introduced
A broadcast attribute will be ignored for SAN Device Virtualization (SDV) devices.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 3.1(2).
Introduced
Cisco MDS 9000 Family System Messages Reference
2-299