Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual page 267

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message
Error Message
Error Message
[chars]).
Error Message
temperature alarm.
Error Message PLATFORM-5-XBAR_DETECT: Xbar [dec] detected (Serial number [chars]).
Error Message PLATFORM-5-XBAR_PWRDN: Xbar [dec] powered down (Serial number
[chars]).
OL-15956-01
PLATFORM-5-PS_FANOK: Fan in Power supply [dec] ok.
Fan module in the named power supply is operating normally.
Explanation
Recommended Action No action is required.
Cisco MDS SAN-OS Release 1.3(1).
Introduced
PLATFORM-5-PS_OK: Power supply [dec] ok (Serial No. [chars]).
Power supply is operating normally.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
PLATFORM-5-PS_REMOVE: Power supply [dec] removed (Serial No.
Power supply has been removed.
Explanation
No action is required.
Recommended Action
Introduced Cisco MDS SAN-OS Release 1.2(2a).
PLATFORM-5-SYS_SHUTDOWN: System shutdown in [dec] seconds due to major
System shut down in seconds because the temperature exceeded a major threshold.
Explanation
Enter the show env temperature CLI command or use a similar Fabric
Recommended Action
Manager/Device Manager procedure to collect more information.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
A new xbar in the slot named has been detected.
Explanation
No action is required.
Recommended Action
Cisco MDS SAN-OS Release 3.0(1).
Introduced
Explanation The xbar in the slot named is powered down.
Perform a
Recommended Action
showmodulexbar','showplatforminternalallmodule[decimaldigit]'and'showmoduleinternalallmodul
e[decimaldigit]'tocollectmoreinformationifyoususpectmodulehasbeenpowereddownduetoerrors.'
Introduced Cisco MDS SAN-OS Release 3.0(1).
Cisco MDS 9000 Family System Messages Reference
2-231