Fcc_Lc-5; Fcd Messages - Cisco AJ732A - MDS 9134 Fabric Switch Messages Manual

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
FCC_LC-6
Error Message

FCD Messages

This section contains the FICON control device (FCD) messages.
FCD-7
Error Message
ch:[hex] chi:[hex] ccw:[hex] token:[hex] cmd:[hex] reason:[chars]
state:[chars]:[dec].
FCDD Messages
This section contains the Fibre Channel device discovery (FCDD) messages.
FCDD-SLOT#-3
Error Message
OL-15956-01
FCC_LC-6-PRIO_UPDATE: Updated enable priority to [dec].
The Fibre Channel Congestion Control line card process is active for packets with
Explanation
priority less than or equal to the threshold shown in the error message.
No action is required.
Recommended Action
Introduced Cisco MDS SAN-OS Release 1.3(4a).
FCD-7-SB3_ABTS_EXCHANGE: sb3 aborted exchange[hex] from vsan:[dec]
SB3 aborted exchange due to the reason given. Aborts are caused by either the channel
Explanation
or control unit detecting a device protocol error. Recovery actions are performed to restore
communication. In certain circumstances aborts occur in normal operations.
Recommended Action No action is required if communication with FICON control device is still
operational.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
FCDD-SLOT#-3-LOG_FCDD_ERR: Nonrecoverable error - exiting: [chars].
Errors caused the program to exit.
Explanation
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Cisco MDS 9000 Family System Messages Reference
2-69