S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Error Message
failure on ports [dec]/[dec]-[dec]/[dec] ([chars]) due to [chars] in device [dec]
(error [hex]).
Error Message
supported.
MODULE-3
Error Message
compatible with supervisor, downloading new image.
MODULE-4
Error Message MODULE-4-MOD_WARNING: Module [dec] reported warnings on ports
[dec]/[dec]-[dec]/[dec] ([chars]) due to [chars] in device [dec] (device error
[hex]).
Cisco MDS 9000 Family System Messages Reference
2-200
MODULE-2-XBAR_SOMEPORTS_FAILED: Xbar [dec] (serial: [chars]) reported
Explanation
Xbar reported a failure in the runtime diagnostic because of failure in some of the ports.
Collect information about the module by issuing the show module internal
Recommended Action
all xbar [decimaldigit] CLI command or by using a similar Fabric Manager procedure.'
Cisco MDS SAN-OS Release 3.0(1).
Introduced
MODULE-2-XBAR_UNKNOWN: Xbar type [[dec]] in slot [dec] is not
The software card ID of xbar is not supported by the supervisor.
Explanation
Collect information about the module by issuing the show module internal
Recommended Action
all xbar [decimaldigit] CLI command or by using a similar Fabric Manager procedure.'
Cisco MDS SAN-OS Release 3.0(1).
Introduced
MODULE-3-MOD_SRG_NOT_COMPATIBLE: Module [dec] firmware is not
The software version of the module is not supported by the supervisor module.
Explanation
Recommended Action
Collect module information by entering the show module internal all module
CLI command or by using a similar Fabric Manager procedure.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
Module reported a warning in the runtime diagnostic because of a failure in some of the
Explanation
ports.
Collect module information by entering the show module internal all module
Recommended Action
CLI command or by using a similar Fabric Manager procedure.
Cisco MDS SAN-OS Release 1.2(2a).
Introduced
Chapter 2
System Messages and Recovery Procedures for the Cisco MDS 9000 Family
OL-15956-01