Clear Xbar-Driver - Cisco Nexus 7000 Reference

clear xbar-driver

S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m
clear xbar-driver
To delete the crossbar-related information, use the clear x-bar driver command.
Syntax Description
xbar
xbar-number
local xbar slot-
number
Defaults
None
Command Modes Any command mode
Supported User Roles network-admin
Release
Command History
4.0(1)
Usage Guidelines This command does not require a license.
Examples
This example shows how to delete the crossbar-related information:
switch(config)# clear xbar-driver xbar 2 inst 1 counters port_num 1 all
switch(config)#
Related Commands Command
show module fabric
show hardware
fabric-utilization
Cisco Nexus 7000 Series NX-OS High Availability Command Reference, Release 5.x
HACR-4
clear xbar-driver [xbar xbar-number | local xbar slot-number]
(Optional) Specifies the crossbar number. The range is from 1 to 5.
(Optional) Specifies the crossbar slot number. The range is from 1 to 4.
Modification
This command was introduced.
Description
Displays information about the module fabric.
Displays information about the hardware fabric utilization.
Cisco Nexus 7000 Series NX-OS High Availability Commands
OL-23374-01