Debug Rib - Cisco MDS 9000 series Command Reference Manual

debug rib

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
debug rib
To enable debugging for the routing information base (RIB) feature, use the debug rib command in
EXEC mode. To disable a debug command, use the no form of the command or use the no debug all
command to turn off all debugging.
Syntax Description
all
detail
error
event
liod_error
liod_event
liod_trace
trace
Defaults Disabled.
Command Modes
EXEC mode.
Command History Release
1.0(2)
3.0(1)
Usage Guidelines If a RIB operation is ignored or not supported, then issue the debug rib all command to find out more
details.
Examples
The following example shows the debug rib error command.
switch# debug rib error
Related Commands Command
no debug all
Cisco MDS 9000 Family Command Reference
6-100
debug rib {all | detail | error | event | liod_error | liod_event | liod_trace | trace}
Modification
This command was introduced.
Added the liod_error, liod_event, and liod_trace options.
Description
Disables all debugging.
Enables debugging for all RIB features.
Enables detailed debugging for all RIB features.
Enables debugging for RIB errors.
Enables debugging for RIB events.
Enables debugging for lossless in-order delivery (LIOD) errors.
Enables debugging for LIOD errors.
Enables debugging for LIOD trace events.
Enables debugging for trace events.
Chapter 6 Debug Commands
OL-8413-07, Cisco MDS SAN-OS Release 3.x