Clear Platform Flow Ip - Cisco Nexus 7000 Series Reference Manual

clear platform flow ip

clear platform flow ip
To clear NetFlow hardware IPv4 entries, use the clear platform flow ip command.
Syntax Description
type
force-export
module mod-num
Defaults
If you do not specify the type, all types are cleared.
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0(1)
Usage Guidelines
This command does not require a license.
Examples This example shows how to specify a forced export of the cleared data to a collector:
switch# clear platform flow ip forced-export
switch#
This example shows how to clear the NetFlow statistics for a module:
switch# clear platform flow ip module 2
switch#
Cisco Nexus 7000 Series NX-OS System Management Command Reference
68
clear platform flow ip [type] [force-export] [module mod-num]
Modification
This command was introduced.
(Optional) Type of entry to clear. See the "Usage Guidelines" section
for valid values.
(Optional) Specifies a forced export of the cleared data to a collector.
(Optional) Specifies a module. The ranges for the module number
depends on the chassis used.
C Commands
OL-25806-03