Show Commands
show ntp pending peers
To display pending Network Time Protocol (NTP) configuration changes on all peers, use the show ntp
pending peers command.
Syntax Description
This command has no arguments or keywords.
Defaults
None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History
Release
4.1(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display the pending NTP configuration changes on all peers:
switch# show ntp pending peers
switch#
Related Commands
Command
show ntp source
show ntp peers
OL-25806-03
show ntp pending peers
Modification
This command was introduced.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
Description
Displays information about the NTP source.
Displays information about NTP peers.
show ntp pending peers
571