System Heartbeat - Cisco Nexus 7000 Series Reference Manual

S Commands

system heartbeat

To enable heartbeat checks (default) and revert to the factory default, use the system heartbeat
command.
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes
Any command mode
Supported User Roles
network-admin
network-operator
vdc-admin
vdc-operator
Command History Release
4.0(1)
Usage Guidelines This command does not require a license.
Examples
This example shows how to enable the heartbeat checks (default) and revert to the factory default:
switch(config)# system heartbeat
switch(config)#
Related Commands Command
system no hap-reset
OL-25806-03
system heartbeat
Modification
This command was introduced.
Description
Disables the heartbeat checks (default) and reverts to the factory default.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
system heartbeat
409