Ptp Priority2 - Cisco Nexus 7000 Series Reference Manual

P Commands

ptp priority2

To configure the priority2 value when advertising the Precision Time Protocol (PTP) clock, use the ptp
priority2 command. To remove the priority2 value when advertising the PTP, use the no form of this
command.
Syntax Description
priority-number
Defaults 255
Command Modes Global configuration mode (config)
Supported User Roles
network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to configure the priority2 value when advertising the PTP clock:
switch# configure terminal
switch(config)# ptp priority2 1
This example shows how to remove the priority2 value configuration for use when advertising the PTP
clock:
switch# configure terminal
switch(config)# no ptp priority2 1
Related Commands Command
feature ptp
ptp source
ptp domain
ptp priority1
OL-25806-03
ptp priority2 priority-number
no ptp priority2 priority-number
Priority number. The range is from 0 to 255.
Modification
This command was introduced.
Description
Enables or disables PTP on the device.
Configures the source IP address for all PTP packets.
Configures the domain number to use for this clock.
Configures the priority1 value to use when advertising this clock.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
ptp priority2
337