Cisco Nexus 7000 Series Reference Manual page 387

Nx-os system management command reference

Hide thumbs Also See for Nexus 7000 Series:

Table of Contents

Usage Guidelines

Event number 0 is a predefined null (or no operation) event. When no event is specified by the user in an

alarm, this event is automatically used by the system. The event causes no action to be taken when triggered;

however, the alarm is still reset. The event cannot be redefined by the user. It is a predefined event.

This command does not require a license.

This example shows how to configure a RMON high-capacity alarm:

switch# config terminal

switch(config)# rmon hcalarm 2 1.3.6.1.2.1.31.1.1.1.6.22544384 30 delta

rising-threshold-high 55 rising-threshold-low 3776798720 4 falling-threshold-high 41

falling-threshold-low 3906340864 owner cisco

Related Commands

rmon hcalarm

Configures a 32-bit RMON alarm.

Configures a 64-bit RMON alarm.

Displays RMON configuration and logging information.

Cisco Nexus 7000 Series NX-OS System Management Command Reference

rmon hcalarm