Scheduler - Cisco Nexus 7000 Series Reference Manual

scheduler

scheduler
To create or schedule a scheduler job, use the scheduler command. To remove a job or scheduled job,
use the no form of this command.
Syntax Description aaa-authentication
username username
password
0
7
password
job name job-name
logfile
size filesize
schedule
name schedule-name
Defaults None
Command Modes Job configuration
Supported User Roles
network-admin
vdc-admin
Command History Release
4.0(1)
Usage Guidelines
To use this command, the scheduler must already be enabled.
To enable the scheduler, use the feature scheduler command.
Cisco Nexus 7000 Series NX-OS System Management Command Reference
368
scheduler {aaa-authentication [username username] password [0 | 7] password |
job name job-name | logfile size filesize | schedule name schedule-name}
no scheduler {aaa-authentication [username username] password [0 | 7] password |
job name job-name | logfile size filesize | schedule name schedule-name}
Modification
This command was introduced.
Begins an AAA authentication exchange with a remote user.
(Optional) Indicates the remote user is entering a username and specifies
the username.
Indicates the remote user is entering a password for authentication.
Indicates the password is in clear text.
Indicates the password is encrypted.
Remote user's password.
Places you into job configuration mode for the specified job name.
The maximum length of the name is 31 characters.
Specifies a logfile configuration.
Specifies the size of the logfile. The range is from 16 to 1024 KB.
Defines a schedule for a job.
Specifies the name of the schedule. The maximum length of the name is
31 characters.
S Commands
OL-25806-03