System Cores - Cisco Nexus 7000 Series Reference Manual

system cores

system cores
To configure the destination for the system core, use the system cores command. To revert to the default,
use the no form of this command.
Syntax Description slot0:
path/
tftp:
/server//
filename
Defaults None
Command Modes Global configuration mode
Supported User Roles
network-admin
vdc-admin
Command History Release
4.0(1)
Usage Guidelines This command does not require a license.
Examples
This example shows how to configure a core file:
switch# configure terminal
switch(config)# system cores slot0:core_file
This example shows how to disable system core logging:
switch# configure terminal
switch(config)# no system cores
Cisco Nexus 7000 Series NX-OS System Management Command Reference
406
system cores {slot0: [path] | tftp:/server// [path/]} filename
no system cores
Specifies the slot0: external file system.
(Optional) Directory path to the file. The directory names in the path are case
sensitive.
Specifies a TFTP server.
Name or IPv4 address of the TFTP server. The server name is case sensitive.
Name for the core file. The name is alphanumeric, case sensitive, and has a
maximum of 32 characters.
Modification
This command was introduced.
S Commands
OL-25806-03