Record Netflow-Original - Cisco Nexus 7000 Series Reference Manual

record netflow-original

record netflow-original
To select an input IPv4 record, use the record netflow-original command. To remove the record
selection, use the no form of this command.
Syntax Description This command has no arguments or keywords.
Defaults
None
Command Modes
NetFlow monitor configuration (config-flow-monitor)
Supported User Roles network-admin
vdc-admin
Command History Release
4.0(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to select an IPv4 input record:
switch(config)# flow monitor Custom-NetFlow-Monitor-1
switch(config-flow-monitor)# record netflow-original
switch(config-flow-monitor)#
This example shows how to remove the record selection:
switch(config-flow-monitor)# no record netflow-original
switch(config-flow-monitor)#
Related Commands Command
show flow sw-monitor
Cisco Nexus 7000 Series NX-OS System Management Command Reference
352
record netflow-original
no record netflow-original
Modification
This command was introduced.
Description
Displays information about NetFlow monitors.
R Commands
OL-25806-03