Cisco Nexus 7000 Series Reference Manual page 412

snmp-server host
port-channel
number
vlan number
traps
use-vrf
udp-port port
Defaults None
Command Modes Global configuration mode
Supported User Roles
network-admin
vdc-admin
Command History Release
4.2(1)
Usage Guidelines
The source-interface configuration overrides the global source-interface configuration.
This command does not require a license.
Examples
This example shows how to configure an SNMP server host:
switch(config)# snmp-server host 192.0.2.1 traps snmp1 udp-port 1
This example shows how to remove an SNMP server host:
switch(config)# no snmp-server host 192.0.2.1 traps snmp1 udp-port 1
switch(config)#
Related Commands Command
snmp-server
community
snmp-server contact
Cisco Nexus 7000 Series NX-OS System Management Command Reference
384
Specifies the port-channel number and the subinterface number in this format: 1.1.
The range for the port-channel number is from 1 to 4096, and the range for the
subinterface number is from 1 to 4093.
Specifies the VLAN interface number. The range is from 1 to 4094.
Sends SNMP traps to this host.
Specifies the name of the VRF on which notifications are to be sent.
Specifies the User Datagram Protocol (UDP) port number of the notification host.
The range is from 0 to 65535.
Modification
This command was introduced.
Description
Configures the SNMP community string.
Configures the SNMP contact information.
S Commands
OL-25806-03